Turkey Fan Mount Template for a Wooden Plaque

Turkey Fan Mount Template for a Wooden Plaque – A turkey fan mount is one of the most popular ways American hunters display a wild turkey trophy. The fanned tail feathers, often paired with the beard, create a striking wall piece when mounted on a wooden plaque. A good turkey fan mount template for a wooden plaque takes the guesswork out of shaping the wood so the fan sits cleanly and looks balanced.

This resource page explains what the template is, how to use it, and where to find a legitimate free printable version so you can build your own mount without buying a commercial kit.

What Is a Turkey Fan Mount Template?

A turkey fan mount template is a full-size pattern (usually printed on 11″ × 17″ ledger paper) that shows the exact outline of the wooden plaque pieces. Most designs use two or three layers of wood: a larger back plate and a smaller front piece (or middle and front pieces) that create a pocket or raised area for the fan base and beard.

The template lets you transfer the shape accurately onto hardwood or scrap lumber, cut it out, and assemble a professional-looking plaque. Thickness of the wood matters more than exact shape—many builders adjust the outline slightly to match their fan size.

Free Printable Turkey Fan Mount Template

One of the most widely shared free resources is the full-scale PDF plan from Midnight Woodworking. The plan is designed to print at 100% on 11″ × 17″ paper and includes the patterns needed to cut the plaque pieces.

Download the free PDF template here:
Turkey Fan Mount PDF Template

The accompanying build article with photos and tips is available on the same site:
Midnight Woodworking Turkey Fan Mount Guide

Print the template at actual size (turn off “fit to page”), cut out the shapes, and use them as patterns on your wood.

Turkey Fan Mount Template for a Wooden Plaque

Turkey Fan Mount Template for a Wooden Plaque (4)
Turkey Fan Mount Template for a Wooden Plaque (3)
Turkey Fan Mount Template for a Wooden Plaque (2)
Turkey Fan Mount Template for a Wooden Plaque (1)

How to Use the Template and Build the Plaque?

  1. Print the template full scale on ledger-size paper.
  2. Attach the paper patterns to your wood with double-sided tape or spray adhesive.
  3. Cut just outside the lines with a bandsaw or jigsaw, then sand to the final shape.
  4. Round over the edges if desired (a ⅜″ round-over is common).
  5. Drill mounting holes and a hanging hole on the back.
  6. Glue and screw the layers together.
  7. Apply finish (tung oil, stain, or clear coat).

The project works well with scrap hardwood such as walnut, oak, or cherry. Many hunters complete the wooden plaque in a few hours once the fan is prepared.

Preparing the Turkey Fan

Before attaching the fan to the plaque, the tail must be cleaned, spread, and stabilized. Common DIY methods include packing the base with borax or using a Bondo (auto-body filler) technique to create a solid, mountable base. Commercial turkey fan mounting kits are also available if you prefer a ready-made solution. Always follow safe handling practices and local regulations when preparing game parts.

Tips for a Clean, Long-Lasting Mount

  • Match the plaque size to your fan so the feathers sit naturally without overcrowding.
  • Use wood screws through the epoxy or Bondo base for a secure hold.
  • Add the beard in a separate hole or groove if your design includes one.
  • Hang the finished mount with a sturdy picture hanger or keyhole slot.
  • Keep the display out of direct sunlight to help preserve feather color.

FAQ

Is there a free turkey fan mount template available?
Yes. The Midnight Woodworking PDF linked above is a free, full-scale printable template that many hunters have successfully used.

What size paper do I need?
The popular free plan is designed for 11″ × 17″ ledger paper printed at 100%. If you cannot print that size, enlarge or draw the shape freehand—wood thickness is more critical than exact outline.

Can I use scrap wood?
Absolutely. Many builders use leftover hardwood scraps and still produce attractive results.

Do I need special tools?
A bandsaw or jigsaw, sander, drill, and basic finishing supplies are sufficient for most designs.

Building your own turkey fan mount with a free template is a rewarding way to display a hard-earned trophy. Download the printable plan, gather some scrap wood, and create a custom plaque that will look great on the wall for years.