Table of Contents
Printable Turkey Fan Mount Plaque Pattern – A turkey fan mount plaque is a popular DIY project for American hunters who want to display a wild turkey’s tail fan (and often the beard) as a lasting trophy. Instead of buying a ready-made plaque, many hunters print a full-size pattern, transfer it to scrap wood, and build a custom mount that matches their style and space.
This resource page explains what a printable turkey fan mount plaque pattern is, how to prepare the fan properly, and where to get a legitimate free printable so you can start building right away.
What Is a Turkey Fan Mount Plaque Pattern?
The pattern is a full-scale template (usually designed for 11×17 ledger paper or tiled letter-size sheets) that shows the outline of the wooden plaque pieces. Typical designs include a larger back plate that supports the fan, a middle spacer with a notch for the beard, and a front plate that covers the base of the feathers.
Once printed at 100% scale, the template is taped or glued to wood, cut out with a bandsaw or jigsaw, sanded, and finished. The finished plaque hides the mounting hardware and gives the fan a clean, professional look on the wall.
How to Prepare the Turkey Fan Before Mounting?
Proper preparation is essential so the fan stays open and lasts for years. The National Wild Turkey Federation provides a clear, trusted step-by-step method using household items and borax:
- Cut the tail (Pope’s nose) from the bird and clean it.
- Remove excess flesh and fat from the quills.
- Treat with borax and pin the feathers in a full-fan position on cardboard.
- Let it dry for two to three weeks.
- Apply a layer of Bondo or similar body filler to the quill base, then drill a mounting hole through the cured filler.
You can follow the complete free guide here:
NWTF – Create the Perfect Fan Mount.
Free Printable Turkey Fan Mount Plaque Pattern
One of the most downloaded free woodworking patterns comes from Midnight Woodworking. The creator designed a simple three-piece plaque (back plate, spacer, and front plate) and made the full-size PDF available at no cost.
Download the free printable pattern directly:
Turkey Fan Mount PDF Template (Midnight Woodworking)
Print at 100% scale with “Fit to Page” turned off. If you only have letter-size paper, tile the pages and tape them together. The thickness of the wood matters more than exact shape, so you can adjust the outline slightly if needed.
A detailed build walkthrough with photos is available on the same site:
Midnight Woodworking – Another Turkey Fan Mount.
Printable Turkey Fan Mount Plaque Pattern




Basic Steps to Build Your Plaque
- Print and cut out the template pieces.
- Transfer the shapes to ¾-inch or ½-inch hardwood scrap (walnut, oak, or maple work well).
- Cut just outside the lines, then sand to the final shape.
- Round over the edges if desired.
- Drill mounting holes and a keyhole slot or hanger hole on the back.
- Glue and screw the layers together.
- Apply oil, stain, or clear finish.
- Attach the prepared fan through the Bondo base with a screw and washer, then add the beard if desired.
Most hunters finish a basic plaque in a few hours once the fan is dry.
Other Free Options for Modern Makers
If you own a 3D printer, free digital models of turkey fan mounts are available on MakerWorld and Printables. These let you print a ready-to-use plastic plaque instead of cutting wood. One popular free model is:
Turkey Fan Mount – Free 3D Model on MakerWorld.
These are excellent alternatives when you want something quick and customizable, but the classic printable wood pattern remains the most popular choice for traditional wall displays.
FAQ
Do I need special tools?
A bandsaw or jigsaw, drill, sander, and basic woodworking clamps are enough for the free pattern.
Can I change the shape?
Yes. The free template is a starting point. Many hunters enlarge or reshape the plaque to fit larger fans or personal preference.
Is the pattern truly free?
Yes. The Midnight Woodworking PDF has been freely available for years and has been downloaded thousands of times. Always download from the original source to avoid altered or paid copies.
How long does the fan need to dry?
Plan on two to three weeks after borax treatment before applying Bondo and mounting.
A well-made turkey fan mount turns a successful spring hunt into a permanent piece of home décor. Start with the free printable pattern, follow proper fan preparation, and you’ll have a clean, professional display that lasts for decades.